|
|
|
On the insulation of buldings,it is more important for absorbtion water factor inner side of contruction compenents.General,wall components which were used in stone buldings, those are more usefull components as thermal insulation which were low water absorbtion and transpire water or humidity which has ben taken inner side or outside. By this reason, two different product as Blokbims and Clay Brick has been analysed absorb water and transpire water from inner side to out side. On the reports;
Table-1 : Absorb water results of Bulding components by the time period.
| |
|
Blokbims |
Clay Bricks |
Time Period |
|
|
Absorb water |
Absorb water |
( hour ) |
( min. ) |
( % ) |
( % ) |
0,1 |
5 |
1,21 |
1,11 |
0,3 |
15 |
1,77 |
1,57 |
0,5 |
30 |
2,23 |
1,98 |
1,0 |
60 |
3,03 |
2,33 |
2,0 |
120 |
4,16 |
2,98 |
6,0 |
360 |
5,53 |
3,89 |
12,0 |
720 |
6,92 |
4,86 |
18,0 |
1080 |
9,67 |
6,97 |
24,0 |
1440 |
13,54 |
9,39 |
30,0 |
1800 |
16,72 |
12,56 |
36,0 |
2160 |
17,83 |
14,66 |
42,0 |
2520 |
18,71 |
15,87 |
48,0 |
2880 |
19,74 |
17,21 |
60,0 |
3600 |
22,36 |
18,24 |
72,0 |
4320 |
23,22 |
18,45 |
84,0 |
5040 |
23,74 |
18,97 |
96,0 |
5760 |
23,84 |
19,26 |
Table-2;Transpire water results of bulding components by time period.
| |
|
Blokbims |
Tuğla |
Time Period |
|
|
Transpire water |
Transpire water |
( hour ) |
( min ) |
( % ) |
( % ) |
0,1 |
5 |
1,93 |
0,38 |
0,3 |
15 |
2,67 |
0,52 |
0,5 |
30 |
3,89 |
0,73 |
1,0 |
60 |
4,56 |
0,91 |
2,0 |
120 |
5,74 |
1,05 |
6,0 |
360 |
6,82 |
1,22 |
12,0 |
720 |
7,91 |
1,45 |
18,0 |
1080 |
8,77 |
1,78 |
24,0 |
1440 |
9,14 |
1,96 |
30,0 |
1800 |
12,48 |
2,06 |
36,0 |
2160 |
13,51 |
2,35 |
42,0 |
2520 |
14,88 |
2,58 |
48,0 |
2880 |
15,43 |
2,98 |
60,0 |
3600 |
15,94 |
3,44 |
72,0 |
4320 |
16,27 |
3,85 |
84,0 |
5040 |
16,92 |
4,27 |
96,0 |
5760 |
17,14 |
5,01 |
Regarding on table-1, it is showing to blokbims just absorb water as % 23,84 in 96 hours. At the same time, clay bricks just absorb water as % 19,26. By the natural transpire water in same condition, Blokbims can transpire very fast water from inner side to out side instead of heating to blocks. But Clay Bricks has been stored very long period to water in side or block and transpire’s time has been takes to very long than Blokbims. Regarding on table-2 which was showing, Blokbims has been trasnpired %17,14 water from inner side in 96 hours, at the same time period; Clay bricks has been transpired % 5,01 water from inside.
Such those bulding components would be use as wall blocks in construction area, without covering by plaster on surfaces and that has been getting water on out side surfaces or below surfaces; those may stored full filled water inside but can just transpire by those time period which shown in time tables. As is known, it is unenviable situation if water would be stored as long time inside of block. Therefor, clay bricks are uneviable products for thermal insulation which absorb water results was showing on table-1.
|
|
|
|
site map
Activities 